Agilent Technologies 1290 Infinity User Manual page 70

3
LC Injector HTC/HTS Description and Installation
Installation
1 Locate the DLW Wash Station module.
2 Attach the holder to the X-axis at selected position as shown in
3 Connect the waste from the injection valve to the DLW Wash station.
4 Connect the Waste Tube to the Wash Station Waste Adapter.
5 Replace the dummy plug(s) on the front if used to connect the waste line
The other two dummy plugs underneath of the waste block are used for the DLW option.
N O T E
The DLW tubing from the DLW Pump outlet could be connected at these wash station inlet
ports. The functionality of the Fast Wash Station would then be applied using this
configuration.
70
on page 69.
coming from the injection valve.
This simple connection of waste lines cleans up the system, avoiding several
waste lines running to the waste container.
Agilent 1290 Infinity LC Injectors HTC/HTS User Manual
Figure 23