3
LC Injector HTC/HTS Description and Installation
Installation
Electrical Connections for Single Injection Valve Setup
Always switch the LC Injector HTC/HTS power supply OFF before connecting or
N O T E
disconnecting the LC Injector HTC/HTS DLW cable or any other LC Injector HTC/HTS
accessory cables!
The electrical connection of the DLW option is identical for the PAL HTS-xt
and the HTC-xt models. The same board is used for both models.
1 The schematic in
82
Figure 33
drive connected to the AUX interface. If a serial or multiposition valve drive
is used, see schematics for 2- or 4-injection valve combinations.
Figure 33
Electrical Connection, DLW Option on a LC Injector HTC/HTS
on page 82 shows an installation using the valve
Agilent 1290 Infinity LC Injectors HTC/HTS User Manual