Agilent Technologies 1290 Infinity User Manual page 127

Object
Ident
Access
Sounds
Time
Communication
System
Service
Objects
1
2
Agilent 1290 Infinity LC Injectors HTC/HTS User Manual
Description
The Identification of the system provides the opportunity to assign Users,
site, and system names. The serial number of the System can be entered at
this level. Remark: After loading a fresh Firmware Backup file, the SNo. is
displayed as XXXXXX.
Access can be selectively opened or limited to different users for the Job,
Method or Setup.
The Beep sound can be adjusted to specific needs. For safety reasons it is
advisable to keep the default settings, especially the Warn Move, turned
ON to signal the start of the System to the user.
The internal clock can be set. Remark: If the clock is fast, reset all items,
from Year to Seconds and use the mandatory F1Set Time.
The communication mode, serial or LAN, can be selected and conditions
1
are defined.
Basic parameters can be predefined for specific needs. Details see
2
"System"
Basic service tests can be activated. Details see
2
Accessing the Firmware class Objects in the Extended User mode provides
more detailed possibilities for object items. At this level an Object can be
copied or deleted by using the specific function keys. This provides quick
access to add e.g. a second or third injector.
Available beginning with PAL Firmware Level 4.1.X.
Explained in detail below.
LC Injector HTC/HTS Description and Installation
on page 128.
Special Functions
"Service" on page 131.
127
3