Agilent Technologies 1290 Infinity User Manual page 29

The following Tray items may be changed by selecting the particular item:
Table 5
Item
Needle Penetr
Tray Type
Tray Offset X
Tray Offset Y
Tray Offset Z
dxRow
dyRow
dzRow
dxCol
dyCol
dzCol
1
A staggered pattern is selectable in firmware class Tray Type. For details see
N O T E
page 137.
Agilent 1290 Infinity LC Injectors HTC/HTS User Manual
Tray - Items
Description
Needle penetration depth into the sample vial. The needle penetration
depth for the selected Tray can be changed by entering the desired value.
The Tray Type which is selected for the Tray is shown. If the Tray enables
the use of different Tray Types it can be changed at this position.
If necessary, a correction to the ideal X-position of Position 1 can be made
by using Tray Offset X.
If necessary, a correction to the ideal Y-position of Position 1 can be made
by using Tray Offset Y.
If necessary, a correction to the ideal Z-position of Position 1 can be made
by using Tray Offset Z.
Correction of any inclination of a Tray (plate) in the X-axis of a row (see
1
Figure 40
Correction of any inclination of a Tray (plate) in the Y-axis of a row (see
1
Figure 40
Correction of any inclination of a Tray (plate) in the Z-axis of a row (see
1
Figure 40
Correction of any inclination of a Tray (plate) in the X-axis of a column (see
1
Figure 40
Correction of any inclination of a Tray (plate) in the Y-axis of a column (see
1
Figure 40
Correction of any inclination of a Tray (plate) in the Z-axis of a column (see
1
Figure 40
Available beginning with PAL Firmware Level 4.1.X.
LC Injector HTC/HTS Operating Instructions
on page 89 for details).
on page 89 for details).
on page 89 for details).
on page 89 for details).
on page 89 for details).
on page 89 for details).
2
Utility Functions
"Tray Type" on
29