Agilent Technologies 1290 Infinity User Manual page 60

3
LC Injector HTC/HTS Description and Installation
Installation
Installing the LC Injection Valve
1 Locate the blue, valve drive. It will have one clamp that is identical to other
2 Attach the valve drive to the X-axis and tighten the mounting screw.
To avoid delay volume between sample injection point and detection, the injection valve
N O T E
should be located near the detection device.
3 Connect the control cable from the valve drive to AUX1.
The installation of another type or multiple Valve Drive(-s) is described in
N O T E
Valves – General Remarks"
4 The injection valve and rotor are pre-installed on the valve drive.
60
object clamps. Loosen the clamp as above (see
Figure 16 Installing the Injection Valve Drive
on page 105.
Agilent 1290 Infinity LC Injectors HTC/HTS User Manual
Figure 16 on page 60).
"Valve Drives and