Agilent Technologies 1290 Infinity User Manual page 183

LC-Inj Cycle Parameter Description
Parameter
CYCLE
SYRINGE
Sample Volume
Air Volume
Pre Cln Slv1
Pre Cln Slv2
Pre Cln Spl
Fill Speed
Fill Strokes
Pullup Del
Inject to
Inject Speed
Pre Inj Del
Pst Inj Del
Pst Cln Slv1
Pst Cln Slv2
Vlv Cln Slv1
Vlv Cln Slv2
Agilent 1290 Infinity LC Injectors HTC/HTS User Manual
Description
LC-Inj Cycle
Selected syringe
Selected sample volume
Volume aspirated after the syringe needle is moved out of the sample liquid
Pre injection syringe wash strokes with solvent from Wash1
Pre injection syringe wash strokes with solvent from Wash2
Pre injection syringe rinse cycles with sample
Speed of plunger movement used to aspirate sample
Number of filling strokes to aspirate sample
Delay time between sample pull-up and ejection
Name of Injector used for injection
Speed of plunger movement used during sample injection
Delay time prior sample injection
Delay time after sample injection
Post injection syringe wash strokes with solvent from Wash1
Post injection syringe wash strokes with solvent from Wash2
Valve rinse cycles with solvent from Wash1
Valve rinse cycles with solvent from Wash2
4
Appendices
Injection Cycles
183