Agilent Technologies 1290 Infinity User Manual page 88

3
LC Injector HTC/HTS Description and Installation
Object Positions
For a Tray Holder, the Reference Position is a hole (slightly larger than the
lower needle guide) in the base plate of the holder. The lower needle guide
should be centered in the hole with the bottom of the needle guide flush
with the bottom of the base plate (see
1 Switch ON the LC Injector HTC/HTS power supply.
2 Observe the keypad display. The model name will display along with the
3 When the "Job Queue" menu displays, complete the following sequence
1
88
software version number. The Job Queue menu screen will then display.
(common to all objects):
Figure 39 Menu Screen Object Trayholder
"Named Tray Holder" represents a predefined Tray Holder, (e.g. THldr1 or Stack1).
Figure 38
Agilent 1290 Infinity LC Injectors HTC/HTS User Manual
on page 87).