Agilent Technologies 1290 Infinity User Manual page 177

4
Appendices
Definition of Terms
Tray
A Tray holds multiple samples. Trays are defined by designating the Tray Type
(see below) and the Tray Holder. Tray names are used to identify the sample
source within a Job.
Tray Type
A Tray Type defines the pattern and sampling sequence of sample locations
within a Tray.
Stack
A Stack is a particular type of Tray Holder that is designed to hold
micro-plates. A six-drawer Stack holds 12 standard microplates, two in each
drawer.
A three-drawer Stack holds six deep-well micro-plates, two in each drawer.
Object Manager
Software to load an Object List to an instrument if a Module (hardware
module) has been added to the System. In a special mode Object Manager can
also be used to create and maintain Object Lists.
Object List
If a Module (hardware) is added to an instrument, several Objects have to be
loaded into the firmware. These Objects are collected in an Object List and
stored in a file with the extension *.pol.
Object Lists are delivered together with Object Manager Software and are
grouped into folders for the different kind of Modules (e.g. Syringes, Tray
Holders, Valve Drives). The name of an Object List starts with the Module part
number with variants added (e.g. first or second Stack). The name of the root
folder includes the revision which is dependent on the firmware version (e.g.
Object Lists Rev. K for firmware 2.X and 3.X).
Object Class
Each Object belongs to an Object Class (e.g. Syringes, Trays, Injectors).
The Object Class defines the Items of an Object.
Agilent 1290 Infinity LC Injectors HTC/HTS User Manual 177