Agilent Technologies 1290 Infinity User Manual page 116

3
LC Injector HTC/HTS Description and Installation
Interfacing the LC Injector HTC/HTS to other Devices
Table 30
Standard Assignment
for LC Injector
HTC/HTS Injection
Cycles
Start JobQueue
(Sync Signal)
Start (Sync Signal)
Start2 (Sync Signal)
Inject (Sync Signal)
Inject2 (Sync Signal)
Injected (Out Signal)
Injectd2 (Out Signal)
Running (Out Signal)
1
116
Standard Assignment for LC Injector HTC/HTS Injection Cycles
Description
Start a Job Queue
(Job). Prerequisite is a
defined Job with a
method assigned.
Useful for automated,
unattended, timed
sampling.
Start a cycle (Input
from LC or data
system)
Continue the cycle
GC-Dual for the
second sample
Inject READY to
INJECT
Inject the second
sample for GC-Dual
cycle
Activated at the
moment the sample
has been injected
Activated at the
moment the second
sample has been
injected
Active as long as the
Job Queue is being
processed and the LC
Injector HTC/HTS is
not in an error state
If used to synchronize with Sync cable, change setting to TTL-In1
Default Events
Immediat
1
Immediat
Immediat (Ignore)
Immediat (Ignore)
SW-Out1
Off
Off
Agilent 1290 Infinity LC Injectors HTC/HTS User Manual
INTERFACE1 Pin #
7
8(GND)
3
4