Agilent Technologies 1290 Infinity User Manual page 56

3
LC Injector HTC/HTS Description and Installation
Installation
1 Remove the three Torx mounting screws A, B, and C, used to fix the
2 Connect the ribbon cable (see
3 Hold the Injection Unit in place against the Y-axis. Make sure the two
56
Injection Unit to the Y-axis
Figure 12 Connecting the Injection Unit Ribbon Cable
locating pins on the Y-axis fit into the two guide pin holes on the Injection
Unit.
Figure 12 on page 56).
Agilent 1290 Infinity LC Injectors HTC/HTS User Manual