3
LC Injector HTC/HTS Description and Installation
Installation
7 Insert the provided cable into the middle socket, between the other two
8 Connect the other end of the cable to the Was Station connector on the
68
sockets on the PCB. For details see
Figure 21
Electrical Connections at the Pump Holder Bracket
Control board, as shown in
Figure 22
Electrical Connection from DLW Pump Holder to the LC Injector HTC/HTS
Board
Figure 21
on page 68.
Figure 22
on page 68.
Agilent 1290 Infinity LC Injectors HTC/HTS User Manual