PEEK exhibits excellent chemical resistance to most of the chemicals used. However, the
N O T E
following solvents are not recommended for use with PEEK, DMSO, THF, methylene
chloride (dichloromethane), nitric acid, sulfuric acid. For more details see compatibility
tables provided by the manufacturer of PEEK material or components.
A green LED is activated when current is applied from the actuator control PCB to the
N O T E
actuator/solenoid. This activation does not indicate that the solenoid will open or close.
Figure 78
Agilent 1290 Infinity LC Injectors HTC/HTS User Manual
DLW Manifold and Actuator/Solenoid
DLW Principles and Operating Details
4
Appendices
187