Table of Contents
Advertisement
Fully Utilizing the Preset Function
Saving Current Media Setup with a Different Name
Procedure
Set up the media (height position, print area) and make sure [SETUP] is lit.
Press [MENU].
PRESET
SAVE
SAVE
NAME1
SET NAME
S
SET NAME
SAMPLE
Press [MENU], then [ ] to go back to the original screen.
Description
The following settings configured in media setup can be saved as up to a maximum of 40 different types of
presets.
Height position of media
P. 13, "Set Height Position of Media (Automatic)"
P. 15, "Set Height Position of Media (Manual)"
Print area (including print-start position)
P. 18, "Specify the Print Area Directly"
P. 19, "Specifying the Print Area from the Print Center Position"
You can assign a name to each preset. Using media names for these presets may aid recognition. These presets
eliminate the need to perform the setting when you are using media with the same shape. You can also use
presets and change just the print area, leaving the height setting unchanged.
P. 33, "Load a Preset and Print/Fine-Tune and Print"
32
Chapter 2 Fully Utilizing the Machine
Press [ ] [ ] in this order until the screen shown to the
left appears.
Press [ ].
Press [ ] [ ] to select one from NAME1 to NAME40.
Press [ENTER] to confirm your entry.
The current "height position of media" and "print area setting" are
saved.
Press [ ] or [ ] to enter a character.
When you have selected the character you want to enter,
press [ ].
The characters you can enter are "A" through "Z," "0" through "9," and
the "-" character. You can enter up to 15 characters, including spaces.
Press [ ] or [ ] to enter the next character.
Enter the following characters in the same way.
When you have finished, press [ENTER] to confirm your
entry.
Advertisement
Table of Contents
