Setup Of Media; About The [Media Setting] Menu; Setup Of Media ([Media Setting] Menu) - Roland Soljet EJ-640 User Manual

Setup of Media

About the [MEDIA SETTING] Menu

To ensure the optimal output according to the media size and type, various setting items are available on this
machine. However, it is hard work to perform these settings one by one referring to this document.
So, the [MEDIA SETTING] menu, which provides interactive guidance for these settings, is available on this
machine. Using this menu, you can set all the basic settings simply by following the instructions on the display.
Since setting details can be stored as a preset menu, you can work efficiently by skipping the setup procedure
2
when using the same type of media. Once the basic settings have been stored in a preset, fine adjustments
can be made as necessary.
The items set through the [MEDIA SETTING] menu can be also set individually.

Setup of Media ([MEDIA SETTING] Menu)

Note: If a setting is not necessary, you can go to the next menu by selecting [NEXT].
1.
Start the [MEDIA SETTING] menu.

Load the media.
Check that the media is not sagging. If any sagging exists, the following correction value settings will
not function effectively.
 P. 26, "Loading Sheet Media"


MENU
MEDIA SETTING
2.
Set the preheater, print heater, and dryer temperatures.

PRE HEATER
40゜C
Current set
temperature

PRINT HEATER
40゜C
32
Press
When the screen shown on the left is displayed, press
Press
40゜C
Recommended temperature: 40°C
Press
Temperature
to be set
Press
40゜C
Recommended temperature: 40°C
Press
.
.
or to set the temperature.
to confirm your entry.
or to set the temperature.
to confirm your entry.