Cleaning The Wiper Tray - Roland TrueVIS VF2-640 User Manual

Replacing Parts for Maintenance

Cleaning the Wiper Tray

Discharged fluid collects in the wiper tray. The wiper tray must be cleaned periodically.
If the following message is displayed, clean the wiper tray.
TIME FOR
TRAY CLEANING
CAUTION
Procedure
1.
Press [ENTER].
TIME FOR
TRAY CLEANING
2.
Press [MENU].
3.
Press [▼] several times to display the screen shown below.
MENU
SUB MENU
4.
Press [▶] once, and then press [▼] several times to display the screen shown below.
SUB MENU
MAINTENANCE
5.
Press [▶] once, and then press [▼] several times to display the screen shown below.
MAINTENANCE
TRAY CLEANING
6.
Press [ENTER].
The screen shown below appears.
EMPTY
DRAIN BOTTLE
7.
Remove the drain bottle and discard the discharged fluid.
IMPORTANT
When you remove the drain bottle, a few drops of discharged fluid may come out of the machine. Exercise caution to
prevent this fluid from soiling your hands or the floor.
CAUTION
WARNING
CAUTION
164
4. Replacing Consumable Parts
Be sure to perform operations as specified by the instructions, and never touch any area
not specified in the instructions.
Otherwise sudden movement of the machine may cause injury.
Before you detach the drain bottle, be sure to wait for the screen to display "EMP-
TY DRAIN BOTTLE." After discarding the discharged fluid, promptly attach the drain
bottle to the machine.
Failing to follow this procedure may cause discharged fluid to flow out of the tube and spill, soiling
your hands or the floor.
Never place discharged fluid or ink near an open flame.
Doing so may cause fire.
To store discharged fluid temporarily, place it in the included drain bottle or in a
durable sealed container such as a metal can or polyethylene tank, and cap the
container tightly.