Step 9: Preparing The Cleaning Liquid And The Ink - Roland TrueVIS LG-640 Setup Manual

1. Assembly and Ink Filling

Step 9: Preparing the Cleaning Liquid and the Ink

Prepare the cleaning liquid pouch and the ink pouch for each color. Then, set these pouches in ink/clean-
ing cartridges.
IMPORTANT
• Be sure to use a new cleaning liquid pouch and new ink pouches.
• Never, under any circumstances, use anything other than the specified type of cleaning liquid or ink.
• The cleaning liquid pouch and the ink pouches must be purchased separately. Contact your authorized Roland DG
Corporation dealer or visit our website (
• Ink/cleaning cartridges are consumable items. To purchase consumable items, contact your authorized Roland DG
Corporation dealer or visit our website (
Procedure
1.
Affix an ink label to the ink/cleaning cartridge.
Affix the ink label to the position shown in the figure.
MEMO
Affix the [CL] label to the cleaning cartridge.
2.
Remove the ink/cleaning cartridge cover.
a. Keep the side with the arrow face up.
b. Remove the cover by sliding it in the direction indicated by the arrow.
3.
Set the cleaning liquid pouch and the ink pouch for each color in the cartridge cases.
40
Installation
https://www.rolanddg.com/
https://www.rolanddg.com/
).
).