Table of Contents
Advertisement
About the Media Used
Conditions for Usable Media
This machine cannot print on every kind of media. When selecting media, be sure to carry out testing
in advance to make sure that satisfactory printing results are obtained.
Size
*1
Width
Maximum media thickness (including back-
*1
ing paper)
Maximum roll outer diameter
Paper tube (core) inner diameter
*1
Applies to both roll and sheet media
*2
When using media with a width smaller than 275 mm (10.8 in.), load the media with the media clamps removed.
Maximum Roll Weight
• 45 kg (99 lb.)
MEMO
If using the take-up unit, this specification depends on the conditions of the take-up unit.
Other Conditions
Media such as the following cannot be used.
• Media whose end is attached to the paper tube (core)
• Media that is severely warped or that has a strong tendency to reroll
• Media that cannot withstand the heat of the dryer
• Media whose paper tube (core) is bent or crushed
• Media that bends under its own weight when loaded
• Media on a sagging roll
• Media that is rolled unevenly
RELATED LINKS
・
P. 243Maximum Printing Area and Margins
20
Basic Information
*2
259 to 1,625 mm
(10.2 to 64.0 in.)
1.0 mm (39.4 mil)
250 mm (9.8 in.)
76.2 mm (3 in.) or 50.8 mm (2 in.)
AP-640
Advertisement
Table of Contents
