Table of Contents
Advertisement
About the Media Used
Conditions for Usable Media
This machine cannot print on every kind of media. When selecting media, be sure to carry out testing
in advance to make sure that satisfactory printing results are obtained.
Size
*1
Width
Cuttable media thickness
Maximum media thickness (including back-
*1
ing paper)
Maximum roll outer diameter
Paper tube (core) inner diameter
*1
Applies to both roll and sheet media
Maximum Roll Weight
• 54-inch model: 35 kg (77 lb.)
• 30-inch model: 30 kg (66 lb.)
MEMO
If using the take-up unit, this specification depends on the conditions of the take-up unit.
Other Conditions
Media such as the following cannot be used.
• Media whose end is attached to the paper tube (core)
• Media that is severely warped or that has a strong tendency to reroll
• Media that cannot withstand the heat of the media heating system
• Media whose paper tube (core) is bent or crushed
• Media that bends under its own weight when loaded
• Media on a sagging roll
• Media that is rolled unevenly
22
Basic Information
295 to 1,371 mm (11.7 to 54 in.)
*1
0.08 to 0.22 mm (3.2 to 8.6 mil; depends on the material of the media)
When performing printing only: 1.0 mm (39.4 mil)
When performing cutting: 0.4 mm (15 mil)
250 mm (9.8 in.)
76.2 mm (3 in.) or 50.8 mm (2 in.)
54-inch model
30-inch model
182 to 762 mm
Advertisement
Table of Contents
