Mx240 Modular Interface Card (Mic) Leds; Mx240 Mic Port And Interface Numbering - Juniper MX240 Hardware Manual

Table 70: MICs Supported by MX10003 Router (continued)
MIC Name
Multi-Rate Ethernet MIC
(12-Port Multi-Rate MACsec
MIC with QSFP+)
SEE ALSO
MX Series MIC Overview
MIC/MPC Compatibility | 130

MX240 Modular Interface Card (MIC) LEDs

Each MIC has LEDs located on the faceplate. For more information about LEDs on the MIC faceplate, see
the "LEDs" section for each MIC in the
SEE ALSO
MICs Supported by MX Series Routers | 140
MX240 Modular Interface Card (MIC) Description | 139
Maintaining MX240 MICs | 341
Troubleshooting the MX240 MICs | 433
Replacing an MX240 MIC | 336

MX240 MIC Port and Interface Numbering

Each port on a MIC corresponds to a unique interface name in the CLI.
NOTE: Fixed configuration MPCs, that is, MPCs with built-in MICs follow the port numbering
of DPCs.
In the syntax of an interface name, a hyphen (-) separates the media type from the MPC number (represented
as an FPC in the CLI). The MPC slot number corresponds to the first number in the interface. The second
number in the interface corresponds to the logical PIC number. The last number in the interface matches
MIC Model Number
JNP-MIC1-MACSEC
MX Series Interface Module
Ports MX10003
12 17.3R2
Reference.
150