Figure 14: Mx104 Interface Port Mapping Example; Table 47: Mx104 Mic Interface Names - Juniper MX104 Hardware Manual

MX104 3D Universal Edge Router Hardware Guide

Table 47: MX104 MIC Interface Names

Component
Built-in 4-port 10-Gigabit Ethernet MIC
54
MPC 0 and MPC 1 have two slots each that accept MICs. The MICs are represented as
and in the CLI and are logically divided into PICs depending on their type. A
MIC 0 MIC 1
MIC installed in the left-most MIC slot (
PIC 1 . A MIC installed in the right-most MIC slot (
.
PIC 3
MPC 2 houses a 4-port 10-Gigabit Ethernet MIC. Both the MPC and the MIC are considered
fixed and are built into the front panel of the chassis. The MPC is represented as
in the CLI. The MIC is represented as
PIC, which is represented as

Figure 14: MX104 Interface Port Mapping Example

Table 47 on page 54 summarizes the relationship between the components and the
interface names.
Component Name in the
CLI
4x 10GE SFP+
or ) is represented in the CLI as
0/0 1/0
0/1
in the CLI and is logically divided into a single
MIC 0
.
PIC 0
0 1 2 3
0 1 2 3
Interface Names
xe-2/0/0
PIC 0
or 1/1 ) is represented as PIC 2
through
xe-2/0/3
Copyright © 2017, Juniper Networks, Inc.
and
and
FPC 2