Acx5096 Router Hardware And Cli Terminology Mapping; Figure 3: Acx5048 Interface Port Mapping; Table 6: Cli Equivalents Of Terms Used In Documentation For An Acx5096 - Juniper ACX5048 Manual

ACX5048 and ACX5096 Universal Access Router
Table 5: CLI Equivalents of Terms Used in Documentation for an ACX5048 Router (continued)
Hardware
Item (as Description (as
displayed in displayed in the
the CLI) CLI)
48x10G–6x40G
Xcvr (n) Abbreviated name of
the transceiver
Power Power supply
supply (n)
Fan Fan

ACX5096 Router Hardware and CLI Terminology Mapping

Table 6: CLI Equivalents of Terms Used in Documentation for an ACX5096 Router
Hardware
Item (as
displayed in Description (as
the CLI) displayed in the CLI)
Chassis ACX5096
8
Value (as displayed
in the CLI)
PIC 0
n is a value
equivalent to the
number of the port in
which the transceiver
is installed.
n is a value in the
range of 0-1.
n is a value in the
range of 0-4.

Figure 3: ACX5048 Interface Port Mapping

1
1— Electrostatic Discharge (ESD) terminal
2—10 Gigabit Ethernet ports (48)
Table 6 on page 8 describes the hardware terms used in an ACX5096 router
documentation and the corresponding terms used in the Junos OS command line interface
(CLI). Figure 4 on page 9 shows the port locations of the interfaces.
Value (as displayed
in the CLI)
–
Item in Documentation Additional Information
Built-in network ports on "ACX5000 Universal Access
the front panel of the Router Overview" on page 3
router
Optical transceivers Port and Interface Specifications
AC power supply "AC Power Supply for an
ACX5000 Router" on page 37
DC power supply
"DC Power Supply for an
ACX5000 Router" on page 39
Fan "Cooling System and Airflow in
an ACX5000 Router" on page 33
2
3— 40 Gigabit Ethernet ports (6)
Item in Documentation Additional Information
Router chassis "Chassis Physical Specifications
for an ACX5000 Router" on
page 49
Copyright © 2015, Juniper Networks, Inc.
3