Appendix 6.3 Parameter setting
Appendix 6.3.1 Master station setting
App. - 61
(1) Network parameter setting
Set the network parameters using GX Works2 as shown below.
For the network configuration setting, refer to (2) in this section. For the refresh
parameters, refer to (3) in this section.
[Operation procedure]
Project window
Parameter Setting the Number of MELSECNET/CC IE/Ethernet Cards]
[Setting screen]
(2) Network configuration setting
In "Network Configuration Setting", set the following network parameters.
[Parameter]
[Network Parameter]
APPENDIXES
[Network
App. - 61