Appendix 2.4 Risend Instruction - Mitsubishi MELSEC-Q Series User Manual

APPENDIX

Appendix 2.4 RISEND instruction

Internal device
Set data (System, user)
Bit
(S1) —
(S2) —
(S3) —
(D)
[Instruction [Execution
symbol] condition]
RISEND
RISEND
Device
Un Start I/O number of the module
(S1) Start number of the device in which control data is stored.
(S2) Start number of the device to which write data is to be stored.
Start number of the device in which the interlock signals are
(S3)
stored.
Device that is turned ON for one scan upon completion of
(D)
writing. (D)+1 also turns ON at an abnormal completion.
The file register of each of the local device and the program cannot be used as a device for setting data.
Device Item
(S1) + 0 Completion status
(S1) + 1 Station number
Access code
(S1) + 2
Attribute code
Buffer memory
(S1) + 3
address
Number of points
(S1) + 4
write
App - 18
The RISEND instruction automatically performs handshaking with an intelligent device
station and writes data to the buffer memory of the specified intelligent device station.
MELSECNET/H
File Direct J \
register
Word Bit
Command
Command
Description
Stores the status when the instruction is complete.
0 : No error (normal completion)
Other than 0: Error code
Specify the station number of the intelligent device station.
Set "0004 ".
H
Specify the buffer memory start address.
Specify the write data count (in word units).
Usable devices
Special
function
module
Word
U \G
—
—
—
—
G.RISEND Un
Un
GP.RISEND
Set data
Within the range of the
specified device
Within the range of the
specified device
Within the range of the
specified device
Within the range of the
specified device
Control data
Set data
Index Constant
register
Z
K, H
—
—
—
—
(S1) (S2) (S3)
(S1) (S2) (S3)
Setting range
0 to FE
H
Setting range
—
0 to 64
0004
1 to 480
MELSEC-Q
Other
S
— —
— —
— —
— —
(D)
(D)
Data type
Binary 16 bits
Device name
Bit
Set by
System
User
User
H
1
User
2
User
App - 18