Replacement
1.
The replacement is the reverse of the removal procedure.
NOTE: Make sure the Springs (2) on the Retard Roll Holder are correctly positioned in the
holes,
Figure
4.
Springs
Figure 4 Springs in Holder
Repairs / Adjustments
REP 6.1, REP 7.1
REP 7.1 Bracket - Connector
Parts List on
PL 7.1
(B205)
Parts List on
PL 7.2
(B215)
Removal
1.
Remove the ADF,
REP
1.2. (B215)
2.
Remove the Control Panel,
3.
Push down on the top of the scanner Front Cover to release five latches on the top of the
scanner Front Cover, then remove the front cover,
July 2019
4-58
REP 8.2
(B205),
REP 8.2
(B215).
Figure
1.
Figure 1 Scanner top cover
Xerox® B205/B215 Multifunction Printer Service Manual
Initial Release