Mitsubishi MR-J4-10A Instruction Manual page 7

Please dispose a servo amplifier, battery (primary battery) and other options according to your local laws and
regulations.
EEP-ROM life
The number of write times to the EEP-ROM, which stores parameter settings, etc., is limited to 100,000. If
the total number of the following operations exceeds 100,000, the servo amplifier may malfunction when the
EEP-ROM reaches the end of its useful life.
Write to the EEP-ROM due to parameter setting changes
Write to the EEP-ROM due to device changes
STO function of the servo amplifier
When using the STO function of the servo amplifier, refer to chapter 13.
For the MR-J3-D05 safety logic unit, refer to appendix 5.
Compliance with global standards
For the compliance with global standards, refer to appendix 4.
«About the manuals»
You must have this Instruction Manual and the following manuals to use this servo. Ensure to prepare
them to use the servo safely.
Relevant manuals
MELSERVO-J4 Series Instructions and Cautions for Safe Use of AC Servos
(Packed with the 200 V class servo amplifier)
MELSERVO-J4 Series Instructions and Cautions for Safe Use of AC Servos
(Packed with the 400 V class servo amplifier)
MR-J4 Servo Amplifier Instruction Manual (Troubleshooting)
MELSERVO Servo Motor Instruction Manual (Vol. 3) (Note 1)
MELSERVO Linear Servo Motor Instruction Manual (Note 2)
MELSERVO Direct Drive Motor Instruction Manual (Note 3)
MELSERVO Linear Encoder Instruction Manual (Note 2, 4)
EMC Installation Guidelines
Note 1. It is necessary for using a rotary servo motor.
2. It is necessary for using a linear servo motor.
3. It is necessary for using a direct drive motor.
4. It is necessary for using a fully closed loop system.
DISPOSAL OF WASTE
Manual name
A - 6
Manual No.
IB(NA)0300175
IB(NA)0300197
SH(NA)030109
SH(NA)030113
SH(NA)030110
SH(NA)030112
SH(NA)030111
IB(NA)67310