Mitsubishi MR-J4-10A Instruction Manual page 216

5. PARAMETERS
No./symbol/ Setting
name digit
PC13 Set the output torque/thrust at the analog torque/thrust command voltage (TC = ±8
V) of +8 V on the assumption that the maximum torque/thrust is 100.0%.
TLC
For example, set 50.0.
Analog
torque/thrust
The maximum torque or thrust ×
command
maximum
When you input a command value of the maximum torque/thrust or more to TC, the
output
value is clamped at the maximum torque/thrust.
Setting range: 0.0 to 1000.0
Function
50.0
is outputted.
100.0
5 - 37
Control
Initial
value mode
[unit]
P S T
100.0
[%]