I
BRAKE
REAR DISC ROTOR
6. Rear Disc Rotor
A: REMOVAL
1) Lift-up the vehicle and remove the wheels.
2) Remove the two mounting bolts and remove the
disc brake assembly.
I
I
3) Suspend the disc brake assembly
so that the
hose is not stretched.
4) Pull down and release the parking brake.
5) Remqve the disc rotor.
NOTE:
If the disc rotor is difficult to remove, try the follow-
ing two methods in order.
(1) Turn the adjusting screw using a slot-type
screwdriver until the brake shoe gets away
enough from the disc rotor.
S4MQ569A
(2) If the disc rotor seizes up within hub, drive
the disc rotor out by installing an 8-mm bolt in
holes B on the rotor.
G4MQ38:
B: INSTALLATION
1) Install in the reverse order of removal.
2) Adjust the parking brake. <Ref. to PB-12, AD-
JUSTMENT, Parking Brake Assembly (Rear Disc
Brake).>
(1) Adjusting screw
(2) Cover
(3) Slot-type screwdriver
(4)
Back plate
BR-25