Subaru IMPREZA 2002 Service Manual page 172

ABS CONTROL MODULE AND HYDRAULIC CONTROL UNIT (ABSCM&H/U)
ABS
Front wheel
981 N
(100 kgf, 221 Ib)
Initial value
6) Hydraulic unit begins to work; and check the fol-
lowing working sequence.
(1) The FL wheel performs decompression,
holding, and compression in sequence, and
subsequently the FR wheel repeats the cycle.
(2) The RR wheel performs decompression,
holding, and compression in sequence, and
subsequently the RL wheel repeats the cycle.
7) Read the values indicated on the brake tester
and check if the fluctuation of values, when decom-
pressed and compressed, meet the standard val-
ues.
Rear wheel
981 N
(100 kgf, 221 Ib)
981 N
(100 kgf, 221 Ib)
or more
When
compressed
1
(50 ~ ~ 0 l y O l b )
I
( 5 0 ; : 0 1 y O Ib)
I
I
E m p r e s s e d or less or less
981 N
(100 kgf, 221 Ib)
or more
8 ) After checking, also check if any irregular brake
pedal tightness is felt.
ABS-1 0