Subaru IMPREZA 2002 Service Manual page 136

FRONT AXLE
DRIVE SHAFT SYSTEM
3) Remove the disc cover from the housing.
G4M0225
4) Using a standard screwdriver, remove the outer
and inner oil seals.
CAUTION:
Do not use old oil seals.
5) Using flat bladed screwdriver, remove the snap
ring.
CAUTION:
Be careful not to damage housing at removal.
H4M1001
6) Using STl
,
support housing securely.
7) Using ST2, press inner race to drive out outer
bearing.
ST1 927400000 HOUSING STAND
ST2 9271 00000 BEARING PULLER
CAUTION:
Do not remove outer race unless it is faulty.
Discard outer race after removal.
Do not replace inner or outer race separately;
always replace as a unit.
8) Using ST and a hydraulic press, drive hub bolts
out.
ST 927080000 HUB STAND
CAUTION:
Be careful not to hammer the hub bolts. This
may deform hub.
G4M0228
Y
DS-20