Subaru IMPREZA 2002 Service Manual page 18

SUB FRAME
FRONT SUSPENSION
3.
Sub Frame
A: REMOVAL
1) Lift-up the vehicle.
2) Remove the under cover.
3) Remove the bolt cover.
4) Remove the clip.
5) Remove the sub frame.
NOTE:
Loosen bolt (1) and leave a few threads caught,
then remove the bolts in the order of (2), (3),
(4),
(51, and (6).
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Replace the M12 bolt with a new one.
Tightening torque:
T1: 34 N.m (3.5 kgf-m, 25 ff-lb)
T2: 55 N-m (5.6 kgf-m, 41 ff-lb)
T3: 71 N.m (7.2 kgf-m, 52 ff-lb)
T4: 105 N-m (10.7 kgf-m, 77 ff-lb)
(1) M8 bolt
(2) M12 bolt (with max)
(3) M12 bolt (with
oil)
(4) M10 bolt
FS-16