Rear Disc Rotor - Subaru Legacy 2002 Service Manual

6. Rear Disc Rotor

A: REMOVAL
S405177A18
1) Lift-up vehicle and remove wheels.
2) Remove the two mounting bolts and remove
the disc brake assembly.
3) Suspend the disc brake assembly so that the
hose is not stretched.
4) Pull down and release parking brake.
5) Remove the disc rotor.
NOTE:
If the disc rotor is difficult to remove try the follow-
ing two methods in order.
(1) Turn adjusting screw using a slot-type
screwdriver until brake shoe gets away enough
from the disc rotor.
(1) Adjusting screw
(2) Cover
(3) Slot-type screwdriver
(4) Back plate
REAR DISC ROTOR
S405177
B4M1710
S4M0463A
BR-27
(2) If disc rotor seizes up within hub, drive disc
rotor out by installing an 8-mm bolt in holes B on
the rotor.
B: INSTALLATION
1) Install in the reverse order of removal.
2) Adjust parking brake.
ADJUSTMENT, Parking Brake Assembly.>
Brake
G4M0383
S405177A11
<Ref. to PB-9,