Parking Brake Cable - Subaru IMPREZA 2002 Service Manual

I
PARKING BRAKE CABLE
PARKING BRAKE
3. Parking Brake Cable
A: REMOVAL
1) Lift-up the vehicle.
2) Remove the rear tires and wheels.
3) Remove the rear cushion.
4) Remove the console box. <Ref. to El-41, RE-
MOVAL, Console Box.>
5) Loosen the parking cable adjusting nut and con-
sole bracket.
6) Remove the parking brake lever.
10) Pull out the parking brake cable from rear
brake.
Disc brake
<Ref. to PB-10, REMOVAL, Parking Brake As-
sembly (Rear Disc Brake).>
Drum brake
<Ref. to BR-33, Rear Drum Brake Assembly.>
11) Pull out the clamp from rear brake.
12) Remove the bolt and bracket from trailing link
bracket
.
13) Remove the bolt and clamp from rear floor.
7) Roll up the floor mat and remove clamps.
0R0030
8) Remove the equalizer cover.
9) Remove the inner cable end from equalizer.
2)
S4M0473A
(1) Equalizer
(2) Inner cable end
S4M0474A
(1) Grommet
(2) Parking brake cable
14) Detach the grommet from rear floor.
15) Remove the cable assembly from cabin by forc-
ibly pulling it backward.
16) Detach the parking brake cable from cable
guide at rear trailing link.
PB-8