Subaru IMPREZA 2002 Service Manual page 474

STEERING GEARBOX
I
POWER ASSISTED SYSTEM (POWER STEERING)
9) Using a press remove pinion and valve assem-
bly from the valve housing.
(3)-
S4M01578
(1
) Valve ASSY
(2) Valve housing
(3) Cloth
10) Using ST and press, remove the dust seal, oil
seal and special bearing from the valve housing.
ST 34099FA120 INSTALLER & REMOVER
SEAL
CAUTION:
Do not apply a force to end surface of valve
housing.
Do not reuse oil seal after removal.
S4M0159B
11) Remove the snap ring using snap ring pliers.
CAUTION:
Do not reuse removed snap ring.
Be careful not to scratch pinion and valve as-
sembly.
12) Press out the bearing together with the back up
washer using pipe of I.D. 38.5 to 39.5 mm (1.516 to
1.555 in) and press.
CAUTION:
Do not reuse removed bearing.
(1)
Oil seal
(2) Special bearing
(1)
Bearing
(2) Backing washer
(3) Oil seal
(4) Pipe
13) Remove the oil seal.
CAUTION:
Do not reuse removed oil seal.
S4M0403A
PS-32