Subaru IMPREZA 2002 Service Manual page 176

FRONT ABS SENSOR
ABS
4. Front ABS Sensor
A: REMOVAL
6) Remove the bolts which secure front ABS sen-
sor to housing, and remove the front ABS sensor.
CAUTION:
1) Disconnect the ground terminal from battery.
2) Jack-up the vehicle, support it with rigid racks,
and remove the wheel. moval.
3) Disconnect the front ABS sensor connector lo-
cated next to the front strut mounting house in en-
Be careful not to damage the pole piece locat-
ed at tip of the sensor and teeth faces during re-
Do not pull the sensor harness during remov-
ai.
gine compartment.
4) Remove the bolts which secure sensor harness
to strut.
5 ) Remove the bolts which secure sensor harness
to body.
B4M2209
(1) To front ABS sensor connector
(2) Bracket
ABS-1 4