Oil Pump - Subaru IMPREZA 2002 Service Manual

I I
OIL PUMP
POWER ASSISTED SYSTEM (POWER STEERING)
7. Oil Pump
A: REMOVAL
1) Remove the ground terminal from battery.
2) Remove the pulley belt cover.
3) Loosen the oil pump pulley nut, then remove the
bolts which secure alternator.
1. NON-TURBO MODEL
4) Loosen the lock bolt and slider bolt and remove
the power steering pump drive V-belt.
5) Disconnect the connector from the power steer-
ing pump switch.
6) Disconnect the pipe C and suction hose from the
oil pump.
CAUTION:
Do not allow fluid from the hose end to come
into contact with pulley belt.
To prevent foreign matter from entering the
hose, cover the open ends of them with a clean
cloth.
(1) Suction hose
(2)
Pipe
C
7) Remove the bolts, which install power steering
pump bracket.
8) Place the oil pump bracket in a vise, remove the
two bolts from the front side of oil pump.
CAUTION:
Do not place oil pump bracket directly in the
vise; use soft pads and hold oil pump lightly to
protect the pump.
STOOl6
I
I
9) Remove the bolt from the rear side of oil pump.
PS-55