1
STEERING GEARBOX
POWER
ASSISTED SYSTEM (POWER STEERING)
2. CONTROL VALVE
1) Disconnect the four pipes from the gearbox.
NOTE:
Remove the pipes E and F as a single unit being
fixed at the clamp plate.
2) Secure the gearbox removed from the vehicle in
vice using ST.
ST 926200000
STAND
CAUTION:
Secure the gearbox in a vice using the ST as
shown. Do not attempt to secure it without this
5) Loosen the adjusting screw and remove the
spring and sleeve.
CAUTION:
Replace the spring and/or sleeve if damaged.
6) Remove the two bolts securing valve assembly.
ST.
ST
S4M0143P
3) Usina ST, loosen the lock nut.
926230000
SPANNER
T008!
4) Tighten the adjusting screw until it no longer
tightens.
I
S4M0154
I
7) Carefully draw out the input shaft and remove
the valve assembly.
8) Slide the dust cover out.
S4M01568
(1)
Dust cover
PS-31