ia
BRAKE HOSE
BRAKE
2.
REAR BRAKE HOSE
C: INSPECTION
1) Pass the brake hose through the hole of bracket,
and lightly tighten the flare nut to connect brake
hose.
2) Insert the clamp upward to fix brake hose.
3) While holding the hexagonal part of brake hose
fitting with a wrench, tighten the flare nut to the
specified torque.
Tightening torque (Brake pipe flare nut):
Ensure there are no cracks, breakage, or damage
on hoses. Check the Joints for fluid leakage. If any
cracks, breakage, damage or leakage is found, re-
pair or replace the hose.
75 N*m (7.5 kgf-m, 70.8 ft-lb)
(1) Brake hose
clip
(2)
Brake hose
(3) Brake pipe
4) Bleed air from the brake system. <Ref. to BR-46,
Air Bleeding.>
BR-49