Subaru IMPREZA 2002 Service Manual page 96

REAR DIFFERENTIAL FRONT OIL SEAL
I
DIFFERENTIALS
15) Tighten the self-locking nut within the specified
torque range so that the turning resistance of com-
panion flange becomes the same as that before re-
placing oil seal.
ST 498427200 FLANGE WRENCH
NOTE:
Use a new self-locking nut.
Tightening torque:
181.4 N-m (18.50 kgf-m, 133.8 ff-lb)
\ \
G3M0034
r .
.
16) Reassembling procedure hereafter is the re-
verse of the disassembling.
17) Fill the differential carrier with gear oil to the fill-
er plug level. <Ref. to DI-17, Differential Gear Oil.>
DI-36