G SENSOR
1
ABS
8. GSensor
B: INSTALLATION
A: REMOVAL
1) Disconnect the ground terminal from battery.
1) Install in the reverse order of removal.
CAUTION:
Do not drop or bump the G sensor.
2) Remove the console cover.
<Ref. to El-41, Console Box.>
3) Disconnect the connector from G sensor.
4) Remove the G sensor from body.
CAUTION:
Do not drop or bump the G sensor.
Tightening torque (G sensor):
32 N.m (3.3 kgf-m, 24 ft-lb)
ABS-23