Subaru IMPREZA 2002 Service Manual page 491

3
PIPE ASSEMBLY
POWER ASSISTED SYSTEM (POWER STEERING)
B: INSTALLATION
1) Temporarily tighten the bolts fixing pipe C and
D.
CAUTION:
Visually check that hose between tank and pipe
D is free from bending or twisting.
Non-TURBO model
(1) Bolt A
(2) Pipe C
(3) Pipe D
TURBOmodel
(1) Pipe C
(2) Pipe D
(1) Connect the pipe D to oil tank.
(2) Install the pipe C to oil pump.
CAUTION:
Use a new gasket.
Tightening torque:
39 N.m (4.0 kgf-m, 28.9 ff-lb)
(3) Tighten bolts fixing pipe C and D.
73 N.m (7.3 kgf-m, 9.4 ff-lb)
Tightening torque:
2) Install the coolant filler tank. (Turbo model)
Tightening torque:
T7: 79 N.m (7.9 kgf-m, 73.7 ff-lb)
T2: 27 N.m (2.7 kgf-m, 75.2 ff-lb)
PS-49