LATERAL LINK
REAR SUSPENSION
I
2) Press the ST plunger until bushing flange pro-
trudes beyond lateral link.
NOTE:
Use the same ST as that used during disassembly.
c .
.
(1)
Press
(2) Plunger
(3) Lateral link
(4)
Flange
3) Turn the lateral link upside down. Press the ST
plunger in the direction opposite that outlined in the
former procedure until bushing is correctly posi-
tioned in trailing link.
NOTE:
Using the same ST as that used during dissassem-
bly.
(1) Press
(2) Plunger
(3) Lateral link
E: INSPECTION
Visually check the lateral links for damage or
bends.
RS-18