Subaru IMPREZA 2002 Service Manual page 391

Hide thumbs Also See for IMPREZA 2002:

Table of Contents

FRONT DISC BRAKE ASSEMBLY

5) Remove the piston seal from caliper body cylin-

1. NON-TURBO MODEL

1) Clean the caliper body interior using brake fluid.

2) Apply a coat of brake fluid to the piston seal and

fit piston seal in groove on caliper body.

3) Apply a coat of brake fluid to the entire inner sur-

face of cylinder and outer surface of piston.

4) Apply a coat of specified grease to the boot and

fit in the groove on ends of cylinder and piston boot

onto cylinder.

NIGLUBE RX-2 (Part No. 003606000)

5) Insert the piston into cylinder.

6) Remove the lock pin boot and guide pin boot.

Do not force the piston into cylinder.

(2) Piston boot

6) Position the boot in grooves on cylinder and pis-

(4) Piston seal

7) Apply a coat

of specified grease to the lock pin

and guide pin outer surface, cylinder inner surface,

and boot grooves.

NIGLUBE RX-2 (Part No. 003606000)

Chapters

Table of Contents