Ip Fax Switches - Ricoh D127 Field Service Manual

5. Appendix: Fax Service Program
Sidaa manual calibration setting
4 0: Off
1: On
5-7 Not used

IP Fax Switches

IP Fax Switch 00 [SP No. 1-111-001]
No.
0 Not used
IP Fax Transport
1
0: TCP, 1: UDP
IP Fax single port selection
2
0: OFF, 1: ON (enable)
IP Fax double ports (single data port)
selection
3
0: OFF, 1: ON (enable)
IP Fax Gatekeeper
4
0: OFF, 1: ON (enable)
IP Fax T30 bit signal reverse
5
0: LSB first, 1: MSB first
IP Fax max bit rate setting
6
0: Not affected, 1: Affected
236
1: manually calibrates for communication with a line,
whose current change occurs such as an optical fiber line.
Do not change the settings.
FUNCTION COMMENTS
Do not change this setting.
Selects TCP or UDP protocol for IP-Fax
Selects single data port.
Selects whether IP-Fax uses a double port.
Enables/disables the communication via the
gatekeeper for IP-Fax.
Reverses the T30 bit signal.
When "0" is selected, the max bit rate does not
affect the value of the DIS/DCS.
When "1" is selected, the max bit rate affects the
value of the DIS/DCS.