Ricoh D127 Field Service Manual page 287

Secondary srv IP address
111
Normally, the value is determined automatically on CS I/O device registration. Only IP
address designation is valid.
Secondary srv scheme
112
Normally, the value is determined automatically on CS I/O device registration.
Secondary srv port number
113
Normally, the value is determined automatically on CS I/O device registration.
Secondary srv URL path
114
Normally, the value is determined automatically on CS I/O device registration.
Default Reso Rate Switch
120
Normally, the value is determined automatically on CS I/O device registration.
Reso: Copy (Mono)
The value affects the output resolution. See the list below.
Normally, the value is determined automatically on CS I/O device registration.
*When the resolution cannot be output for the machine specification limit, output is done
by the nearest rate within the limitation.
Value
0
122
1
2
3
4
5
6
[000.000.000.000 to 255.255.255.255]
Default: 000.000.000.000
[Max 6 letter(s)]
[1 to 65535 / 80 / 1 /step]
[0 to 16 letter(s)]
[0 or 1 / 0 / 1 /step]
[0 to 255 / 0 / 1 /step]
Resolution
600dpi
400dpi
300dpi
200dpi
150dpi
100dpi
75dpi
System Service Mode
79