Ricoh D127 Field Service Manual page 302

3. Appendix: SP Mode Tables
002 Local Port
5857 Save Debug Log
ON/OFF
001
Switches the debug log feature on and off. The debug log cannot be captured until this
feature is switched on.
Target (2: HDD 3: SD)
Selects the destination where the debugging information generated by the event selected
by SP5858 will be stored if an error is generated
002
[2 to 3 /1]
2: HDD
3: SD Card
Save to HDD
005
Specifies the decimal key number of the log to be written to the hard disk.
Save to SD Card
006
Specifies the debug log number for saving to an SD card.
Copy HDD to SD Card (Latest 4MB)
Takes the most recent 4 MB of the log written to the hard disk and copies them to the SD
Card.
009
A unique file name is generated to avoid overwriting existing file names on the SD Card.
Up to 4MB can be copied to an SD Card. 4 MB segments can be copied one by one to
each SD Card.
Copy HDD to SD Card (Latest 4MB Any Key)
Takes the log of the specified key from the log on the hard disk and copies it to the SD
Card.
010
A unique file name is generated to avoid overwriting existing file names on the SD Card.
Up to 4 MB can be copied to an SD Card. 4 MB segments can be copied one by one to
each SD Card. This SP does not execute if there is no log on the HDD with no key
specified.
94
[0 or 1 / 0 / 1/step]
CTL 0: Disallow
1: Allow
CTL -
0: OFF, 1: ON