Ricoh D127 Field Service Manual page 428

5. Appendix: Fax Service Program
Communication Switch 03 [SP No. 1-104-004]
No
Maximum number of page
0-7 retransmissions in a G3 memory
transmission
Communication Switch 04 [SP No. 1-104-005]
No
Remote switch setting for TEL mode
0
0: OFF 1: ON
Remote switch setting for FAX
mode
1
0: OFF 1: ON
Remote switch setting for AUTO
mode
2
0: OFF 1: ON
3-7 Not used
Communication Switch 05 [SP No. 1-104-006]
No
Number setting for remote
0-3
switching
4-7 Not used
Communication Switch 06 - Not used (do not change the settings)
Communication Switch 07 - Not used (do not change the settings)
Communication Switch 08 - Not used (do not change the settings)
Communication Switch 09 [SP No. 1-104-010]
220
FUNCTION
FUNCTION
FUNCTION
COMMENTS
00 - FF (Hex) times.
This setting is not used if ECM is switched on.
Default setting - 03(H)
COMMENTS
Determines whether remote switching is ON/OFF on
receiving fax transmission, in TEL mode.
Determines whether remote switching is ON/OFF on
auto receiving, in FAX mode.
Determines whether remote switching is ON/OFF on
auto receiving, in AUTO mode.
Do not change the settings
COMMENTS
00-09 (0-9: HEX)
Selects the handset number pushed to switch between
TEL/FAX.
Do not change the settings