Ricoh D127 Field Service Manual page 301

216 Interval Time
217 Timing
Installation Date
5849
Displays or prints the installation date of the machine.
001 Display
002 Switch to Print
003 Total Counter
Stamp Data Download
Push [Execute] to download the fixed stamp data from the machine ROM onto the hard
disk. Then these stamps can be used by the system. If this is not done, the user will not
5853
have access to the fixed stamps ("Confidential", "Secret", etc.).
You must always execute this SP after replacing the HDD or after formatting the HDD.
Always switch the machine off and on after executing this SP.
Remote ROM Update
5856
Allows the technician to upgrade the firmware using a parallel cable when updating the
remote ROM.
Specifies the transmit interval.
[1 to 1000 / 1 / 1 hour/step]
This SP is activated only when SP5848-217 is set to
"2 (Transmit periodically)".
Selects the transmit timing.
[0 to 2 / 0 / 1/step]
0: No Transmit, 1: Transmit one by one
2: Transmit periodically
CTL
The "Counter Clear Day" has been changed to "Installation Date"
or "Inst. Date".
Determines whether the installation date is printed on the printout
for the total counter.
[0 or 1/ 1 / 1/step]
0: Off (No Print), 1: On (Print)
Displays the total counter when the installation date is registered
to the machine.
System Service Mode
93