Ricoh D127 Field Service Manual page 298

3. Appendix: SP Mode Tables
049 Initialize All LDAP Addr Book
050 Initialize All Addr Book
051 Backup All Addr Book
052 Restore All Addr Book
053 Clear Backup Info
060 Search Option
062 Complexity Option 1
063 Complexity Option 2
90
Clears the LDAP address book information, except the
user code.
Clears all directory information managed by UCS,
including all user codes.
Turn the main power switch off and on after executing
this SP.
Uploads all directory information to the SD card.
Downloads all directory information from the SD card.
Deletes the address book data from the SD card in the
service slot.
Deletes only the files that were uploaded from this
machine.
This feature does not work if the card is write-protected.
Note: After you do this SP, go out of the SP mode, and
then turn the power off. Do not remove the SD card until
the Power LED stops flashing.
This SP uses bit switches to set up the fuzzy search
options for the UCS local address book.
Bit0: Checks both upper/lower case characters
Bit1: Japan only
Bit2 to 7: Not used
Use this SP to set the conditions for password entry to
access the local address book. Specifically, this SP
limits the password entry to upper case and sets the
(1)
length of the password.
[0 to 32 / 0 / 1 /step]
Use this SP to set the conditions for password entry to
access the local address book. Specifically, this SP
limits the password entry to lower case and defines the
(1)
length of the password.
[0 to 32 / 0 / 1 /step]