Ricoh D127 Field Service Manual page 363

SP1 Mode Number
1001* 5 Scan NV Version
1005* 1 Erase Margin (Remote
Scan) Range from 0 to 5
mm
1009* 1 Remote Scan disable
1010* 1 Non Display ClearLight
PDF
1011* 1 Org Count Disp
1012 1 User Info Release
1013 2 Scan to Media Device
Setting
SP Number/Name
Compression level (grayscale)
2
0
These SP codes set the compression ratio for the grayscale or full color processing mode that can be
2
selected with the notch settings on the operation panel.
1
Range: 5 (lowest ratio)
Comp1:
5-95
1 [5 to 95 / 20 / 1/step]
(Middle I-
Qual)
Displays the scanner NV version.
This shows as following: Function name _ Model
name _ Version
Creates an erase margin for all edges of the scanned
image.
The margin color (Black or White) depends on color-
tone and invert settings.
[0 to 5 / 0mm / 1mm step]
Enables or disables the network TWAIN scanner
function.
[0: Enable, 1: Disable]
Sets the clear light PDF display ON/OFF
[0: OFF 1: ON]
Sets the original counter display ON/OFF
[0: OFF 1: ON]
Clears or does not clear user information after a job.
[0 or 1 / 1 / - ]
0: Not clear, 1: Clear
Sets "Scan To Multi Media" function ON/OFF.
[0 or 1 / 1 / - ]
0: OFF, 1: ON
95 (highest ratio)
System Service Mode
Function and [Setting]
Function and [Setting]
155