Ricoh D127 Field Service Manual page 274

3. Appendix: SP Mode Tables
System Log Disp
Determines whether an error code appears in the system log after a user authentication
failure occurs.
001
[0 to 1/0/1]
0: Off
1: On
Panel Disp
Determines whether an error code appears on the operation panel after a user
authentication failure occurs.
002
[0 to 1/1/1]
1: On
0: Off
5507 Supply Alarm
080 Toner Call Timing
5508* CC Call
Jam Remains
001*
Enables/disables initiating a call for an unattended paper jam.
Continuous Jams
002*
Enables/disables initiating a call for consecutive paper jams.
Continuous Door Open
003*
Enables/disables initiating a call when the front door remains open.
SC/Alarm Setting
5515
With @Remote in use, these SP codes can be set to issue an SC call when an SC error
occurs. If this SP is switched off, the SC call is not issued when an SC error occurs.
66
CTL -
0: Toner is replaced (default)
1: Toner near end or end
CTL -
0: Disable, 1: Enable
0: Disable, 1: Enable
0: Disable, 1: Enable
CTL -